What is a synchro mechanism? Office chair recline types decoded
Every maker has its own name for the part under the seat. Here is what the names mean, what the standard actually asks for, and how the chairs in our register compare.
Updated By The Best Office Chairs Europe editorial team41 sources
A synchro mechanism links an office chair's seat and backrest so they recline together at a fixed ratio, the backrest moving further than the seat. Giroflex gives its ratio as about 1:2.5, so 20° of backrest recline tilts the seat about 8°. EN 1335 does not require a synchro: it sets adjustment ranges, not a mechanism type.
Of the 36 chairs in our register whose makers describe how they recline, the makers call 18 a synchro (including 4 with a seat that also moves sideways), and 9 set their resistance automatically from body weight.
How does a synchro mechanism move?
When you lean back on a synchro chair, the backrest and the seat both tilt, but not by the same amount. The mechanism drives them at a set ratio. Giroflex, part of Flokk, describes its own synchro as driving "the motion of the seat and backrest individually, at a ratio of approx. 1:2.5". BakkerElkhuizen, which also sells chairs, says the ratio is "usually 2:1" and gives the example of a seat tilting 10° while the backrest tilts 20°.
The point of the ratio is that your trunk opens up as you recline while your thighs stay close to level. On a chair where seat and back rotate as one piece, the seat tilts as far as the backrest, so the front edge of the seat either lifts under your thighs or, if the pivot is at the front, your hips drop back.
No maker in our register publishes its own ratio on the spec sheets we read. Giroflex's is the only maker figure we found, so treat "1:2" to "1:3" as the usual range described in the trade, not as a measured value for any chair below.
What are the four main recline types?
| Type | How seat and back move | Seat : back | Example in the register |
|---|---|---|---|
| Centre tilt (single-point) | One rigid seat-and-back unit rotates about a pivot under the seat | 1:1 | No maker in the register uses the term. HÅG describes its inBalance only as a tilt “backwards and forwards” (HÅG SoFi), not as a synchro |
| Knee tilt | The same rigid rotation, with the pivot near the front edge of the seat, so your feet stay down | 1:1 | None of the task chairs in the register is described this way by its maker |
| Synchro | Seat and back linked at a fixed ratio; the back reclines further | about 1:2 to 1:3 | Interstuhl EVERYis1, Dauphin Indeed, Steelcase Amia, IKEA MARKUS |
| Synchro + 3D seat | A synchro whose seat also moves sideways or all round | as synchro | Wilkhahn Trimension (ON), Löffler ERGO TOP (Lezgo 72) |
Two other terms turn up on spec sheets. An asynchro (asynchronous) mechanism lets you set the seat and backrest angles independently; BakkerElkhuizen describes it this way and calls RH's Logic 220 a hybrid of single-point tilt and asynchro. The RH Logic 400 in our register likewise pairs a tilt with a separately adjustable back angle (27.4°). A permanent-contact back moves while the seat stays fixed.
How much does the seat tilt? The ratios worked out
Seat tilt is simply backrest recline divided by the ratio. The second half of the table shows why that matters for your thighs: if the seat pivots 200 mm behind its front edge (an illustrative distance, not a maker figure), the front edge rises by 200 mm × sin(seat tilt).
| Backrest recline | Seat at 1:1 | Seat at 1:2 | Seat at 1:2.5 | Seat at 1:3 | Front-edge rise at 1:1 | at 1:2.5 |
|---|---|---|---|---|---|---|
| 10° | 10° | 5° | 4° | 3.3° | 35 mm | 14 mm |
| 15° | 15° | 7.5° | 6° | 5° | 52 mm | 21 mm |
| 20° | 20° | 10° | 8° | 6.7° | 68 mm | 28 mm |
| 25° | 25° | 12.5° | 10° | 8.3° | 85 mm | 35 mm |
At 20° of recline, a 1:1 tilt lifts the front edge by about 68 mm on that geometry; a 1:2.5 synchro lifts it by about 28 mm. A knee tilt avoids the lift by moving the pivot to the front, but the seat still tilts the full 20°, so your hips drop instead.
What do EN 1335 and EU law require of a mechanism?
Neither names a mechanism type. They set what must adjust and by how much.
- EN 1335-1:2020, Types Ax, A and B: the backrest inclination must adjust over at least 15°. Type C has no inclination-range requirement. The seat-to-back angle must be at least 90° on every Type.
- Seat angle: where it adjusts, the range must cover at least 5°; for Types Ax and A the range must include 0°. Types Ax and A must have an adjustable seat angle; B and C may have a fixed one.
- Directive 90/270/EEC (display screen work) asks only that "the seat back shall be adjustable in both height and tilt".
So a Type A chair needs an adjustable backrest angle and seat angle, but the standard does not say they must be linked. A synchro is one way to provide both; separate adjusters are another. The full dimension table, including the 400–520 mm Type A seat-height range, is in our EN 1335 guide, and the Directive is covered in the DSE Directive and your office chair.
What do the makers' mechanism names mean?
"Type" below is what the maker itself says the mechanism is. Where a maker names its mechanism but does not say whether seat and back move at a ratio, we write "not stated" rather than guess.
| Chair | Maker's name | Type (maker's word) | Tension | Published figures |
|---|---|---|---|---|
| Dauphin Indeed mesh (ID 7056) | Syncro-Evolution | Synchro | Manual | Opening angle 128°; lockable in 4 positions; seat tilt 0° or −4° |
| Haworth Fern | Synchronized 3-point mechanism | Synchro | Manual | Multi-position recline lock |
| Haworth Zody | 3-point synchronised mechanism | Synchro | Manual | Multi-position recline lock |
| IKEA JÄRVFJÄLLET | Synchronised tilt mechanism | Synchro | Automatic | Automatic tension from body weight; tilt lock, 3 positions |
| IKEA MARKUS | Synchronised tilt mechanism | Synchro | Manual | Tilt lock, 3 positions |
| Interstuhl EVERYis1 (EV216) | Synchronous mechanism | Synchro | Manual | Weight setting 45–125 kg; opening angle up to 118°; back lockable in 4 positions; seat +4.2° forward (option) |
| Interstuhl JOYCEis3 (JC216) | Synchronous mechanism | Synchro | Manual | Weight setting 45–125 kg; opening angle up to 116°; seat +4.1° forward (option) |
| Kinnarps 8000 (art. 8130) | Synchrone | Synchro | Manual | Lockable in any position; seat angle with a forward position |
| Kinnarps Capella Classic (Capella X family) | SyncMotion (FreeMotion also offered) | Synchro | Manual | Back tilt lock; the maker says the seat cannot be locked |
| Steelcase Amia | Synchronised mechanism | Synchro | Manual | Back lock in the forward position |
| Steelcase Please | Manual Synchronized Mechanism | Synchro | Manual | none published |
| Steelcase Series 1 | Weight-activated or manual synchro | Synchro | Automatic | Weight-activated dial: upright back lock, full recline with a 30% boost, full recline (2026 EMEA user guide) |
| Steelcase Series 2 | Weight-activated or manual synchro | Synchro | Automatic | Weight-activated: full recline, a boost setting, upright lock. Manual: full recline, two intermediate stops, upright lock |
| Vitra AC 5 Work | FlowMotion | Synchro | Manual | Synchronised forward tilt (can be disengaged); back resistance and back lock |
| Löffler Figo Air (1N) | ERGO TOP + synchro mechanism | Synchro + 3D seat | Manual | Opening angle lockable in 5 positions |
| Löffler Lezgo 72 (LG 72) | ERGO TOP + synchro mechanism | Synchro + 3D seat | Manual | Back pressure 45–120 kg; opening angle lockable in 5 positions; 3D seat lockable (option) |
| Wilkhahn IN (184/7) | Trimension | Synchro + 3D seat | Manual | Tension range 45–140 kg; 5° 3D forward tilt at a button; lockable in the neutral position |
| Wilkhahn ON (174/7) | Trimension | Synchro + 3D seat | Manual | Counter-pressure for 45–120 kg (max. 4.5 turns); back and seat lockable in the front position |
| Herman Miller Cosm | Auto-Harmonic Tilt | Weight-activated | Automatic | none published |
| Humanscale Freedom | Weight-sensitive, self-locking recline | Weight-activated | Automatic | 20° of movement; for users of 45.4–136 kg; no tension dial or recline lever |
| Sedus se:motion | Kinetic Swing | Weight-activated | Automatic | Opening angle 23°, locking possible; seat follows up to 5° forward |
| Steelcase Karman | Weight-activated mechanism | Weight-activated | Automatic | Comfort dial with four recline positions |
| HÅG Capisco 8106 | HÅG inBalance | Tilt (not synchro) | Manual | Tilt range +3° to −17°; lockable tilt |
| HÅG Futu Mesh 1100 | HÅG inBalance | Tilt (not synchro) | Manual | Lockable tilt |
| HÅG SoFi Mesh 7500 | HÅG inBalance | Tilt (not synchro) | Manual | Tilts backwards and forwards; resistance adjustable both ways; lockable tilt |
| RH Logic 400 | Frictionless tilt mechanism | Tilt (not synchro) | not stated | Lockable in any position; separately adjustable back angle (27.4°); seat angle −12° to +11.8° |
| Herman Miller Aeron | Harmonic 2 Tilt | Not stated | not stated | Options: standard tilt, tilt limiter, tilt limiter with seat angle |
| Herman Miller Embody | Tilt with “kicker” extended recline | Not stated | not stated | none published |
| Herman Miller Mirra 2 | Harmonic 2 Tilt | Not stated | not stated | none published |
| Herman Miller Sayl | Harmonic Tilt | Not stated | not stated | none published |
| Sedus se:flex | Similar (automatic weight adjustment) | Not stated | Automatic | Options ComfortSwitch (soft/firm) and ActiveMotion (3D seat) |
| Steelcase Gesture | Not named (3D LiveBack back) | Not stated | Manual | Multi-position recline lock |
| Steelcase Leap | Natural Glide System | Not stated | Manual | Seat glides forward as you recline; store page lists both “5-position recline lock” and “four recline-stop settings with an upright back lock” |
| Vitra ID Mesh | FlowMotion (AutoMotion optional) | Not stated | Manual | Back resistance adjustable; lockable upright; forward tilt and seat depth optional |
| Herman Miller Setu | Kinematic Spine (no recline mechanism) | No mechanism | not stated | none published |
| Interstuhl PUREis3 (PU213) | Smart Spring (no conventional mechanism) | No mechanism | Automatic | Seat moves up to 26° sideways and 12° forward; no weight setting |
8 names stay "not stated", including Herman Miller's Harmonic tilts and Steelcase's Natural Glide on the Leap, whose seat glides forward as you recline. The Steelcase UK store lists the Leap's lock both as a "5-position recline lock" and as "four recline-stop settings with an upright back lock"; we show both. The Leap vs Amia comparison sets the two Steelcase mechanisms side by side.
Manual tension or weight-activated?
Every recline mechanism resists you with a spring. The question is who sets how hard it pushes back.
- Manual: a knob or crank you turn. Makers that publish the range give it in kilograms of body weight: 45–125 kg on the Interstuhl EVERYis1 and JOYCEis3, 45–120 kg on the Löffler Lezgo 72 and on the Wilkhahn ON (at most 4.5 turns), 45–140 kg on the Wilkhahn IN.
- Automatic: the mechanism reads your weight. Humanscale says the Freedom's weight-sensitive recline, with 20° of movement, uses "each sitter's body weight" to set tension and recline, for users of 45.4–136 kg; Steelcase sells the Series 2 with either a weight-activated or a manual synchro, and the two have different recline stops (compared with the Leap's manual tension in Series 2 vs Leap).
Automatic tension suits desks that several people share, because nobody has to find the knob. If you are near either end of a published range, a manual mechanism with a stated range tells you more. Our guide for heavier users explains why a tension range is not the same as a maximum user weight.
What to check on a spec sheet
- What the maker calls the mechanism. "Synchro", "synchronous" or "synchronised" means seat and back are linked. A brand name alone does not tell you.
- The opening angle or recline range, in degrees: 128° on the Dauphin Indeed, up to 118° on the EVERYis1, an opening angle of 23° on the Sedus se:motion, which TÜV describes as having no mechanism, only a plastic seat rocker.
- How many lock positions, and whether it locks upright. Some lock anywhere (Kinnarps 8000, RH Logic 400); the Kinnarps Capella's seat cannot be locked at all.
- The tension range in kg, if manual, against your own weight.
- Forward tilt. Interstuhl offers +4.2° on the EVERYis1; Wilkhahn's IN tilts 5° forward at a button. Forward tilt is a seat-angle adjustment, which EN 1335-1 requires on Types Ax and A.
- The EN 1335 Type, which tells you the backrest inclination range is at least 15°.
For the rest of the vocabulary, from 4D armrests to gas-lift classes, see the office chair glossary; to compare full specifications, use the chair register.
Questions buyers ask
What is a synchro mechanism on an office chair?
A recline mechanism that links the seat and backrest so they move together at a fixed ratio, with the backrest reclining further than the seat. Giroflex gives its ratio as about 1:2.5: for every degree the seat tilts, the backrest tilts about two and a half.
What is the difference between synchro tilt and knee tilt?
In a knee tilt the seat and backrest rotate together, 1:1, about a pivot near the front edge of the seat, so your feet stay on the floor but the seat tilts as far as the back. In a synchro the backrest reclines further than the seat, so the seat angle changes less as you lean back.
Does EN 1335 require a synchro mechanism?
No. EN 1335-1:2020 sets dimensions and adjustment ranges, not a mechanism type. For Types Ax, A and B the backrest inclination must adjust over at least 15°; where the seat angle adjusts, it must adjust over at least 5°. A chair can meet that with a synchro, a tilt or separate adjusters.
Is a weight-activated mechanism better than a manual one?
Neither is better by default. A weight-activated mechanism sets its own resistance from your body weight, which suits shared desks; a manual one lets you set the resistance yourself. Several makers publish the weight range their setting covers, for example 45–125 kg on the Interstuhl EVERYis1.
Sources
- Flokk (Giroflex): Understanding synchro motion: flokk.com/en/uk/giroflex/understanding-synchro-motion
- BakkerElkhuizen: Understanding the mechanisms of the chair: www.bakkerelkhuizen.com/knowledge/understanding-the-mechanisms-of-the-chair/
- SGS test report reproducing the EN 1335-1:2020 Table 2 requirements (PDF): www.centrufficio.it/wp-content/uploads/2020/04/Play_certificazione-EN1335-1-2020-tipo-B.pd
- CATAS: EN 1335 2020 edition summary (PDF): catas.com/uploads/media/catas-en-1335-eng.pdf?v3.0
- Council Directive 90/270/EEC (display screen equipment), EUR-Lex: eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:31990L0270
- Dauphin Indeed mesh (ID 7056): maker document for the mechanism: www.dauphin.de/fileadmin/Dauphin/Documents/All/Datasheets/Dauphin-Indeed-Datenblatt-Netz_E
- Haworth Fern: maker document for the mechanism: www.haworth.com/content/dam/digital/eu/docs/products/haworth/chairs/fern/fern_product-shee
- Haworth Zody: maker document for the mechanism: www.haworth.com/content/dam/digital/eu/docs/products/haworth/chairs/zody/zody_product_shee
- IKEA JÄRVFJÄLLET: maker document for the mechanism: www.ikea.com/ie/en/p/jaervfjaellet-office-chair-with-armrests-glose-black-20510642/
- IKEA MARKUS: maker document for the mechanism: www.ikea.com/ie/en/p/markus-office-chair-vissle-dark-grey-30261152/
- Interstuhl EVERYis1 (EV216): maker document for the mechanism: www.interstuhl.com/prdb/EV216LV01.pdf
- Interstuhl JOYCEis3 (JC216): maker document for the mechanism: www.interstuhl.com/prdb/JC216LV01.pdf
- Kinnarps 8000 (art. 8130): maker document for the mechanism: www.kinnarps.com/mediacdn/79ff6f4f-b68a-4716-a33a-53abc54cbd74/d55ae8ae-7cca-57b0-9e2a-84f
- Kinnarps Capella Classic (Capella X family): maker document for the mechanism: www.kinnarps.com/mediacdn/79ff6f4f-b68a-4716-a33a-53abc54cbd74/a4db7b15-7f86-5185-a116-395
- Steelcase Amia: maker document for the mechanism: uk.steelcase.com/products/amia
- Steelcase Please: maker document for the mechanism: www.steelcase.com/eu-en/products/office-chairs/please/
- Steelcase Series 1: maker document for the mechanism: www.steelcase.com/eu-en/products/office-chairs/steelcase-series-1/
- Steelcase Series 2: maker document for the mechanism: www.steelcase.com/eu-en/products/steelcase-series-2/
- Vitra AC 5 Work: maker document for the mechanism: static.vitra.com/media/asset/2335778/storage/master/download/Factbook%2520V-Foam%2520AC5-E
- Löffler Figo Air (1N): maker document for the mechanism: www.loeffler.de/cdn/shop/files/Figo-Air-Loeffler-Datenblatt-2024.pdf
- Löffler Lezgo 72 (LG 72): maker document for the mechanism: www.loeffler.de/cdn/shop/files/Lezgo-Loeffler-Datenblatt-2024.pdf
- Wilkhahn IN (184/7): maker document for the mechanism: www.wilkhahn.com/en/products/task-chairs-office-chairs/in/
- Wilkhahn ON (174/7): maker document for the mechanism: www.wilkhahn.com/en/products/task-chairs-office-chairs/on/
- Herman Miller Cosm: maker document for the mechanism: www.hermanmiller.com/content/dam/hermanmiller/documents/product_literature/product_sheets/
- Humanscale Freedom: maker document for the mechanism: mena.humanscale.com/userfiles/file/Hs_freedom-task-and-headrest_brochure_international-eng
- Sedus se:motion: maker document for the mechanism: www.sedus.com/en/products/chairs/semotion
- Steelcase Karman: maker document for the mechanism: www.steelcase.com/eu-en/products/office-chairs/steelcase-karman/
- HÅG Capisco 8106: maker document for the mechanism: store.flokk.com/global/en-gb/products/hag-capisco
- HÅG Futu Mesh 1100: maker document for the mechanism: store.flokk.com/global/en-gb/products/hag-futu
- HÅG SoFi Mesh 7500: maker document for the mechanism: store.flokk.com/global/en-gb/products/hag-sofi
- RH Logic 400: maker document for the mechanism: store.flokk.com/global/en-gb/products/rh-logic
- Herman Miller Aeron: maker document for the mechanism: www.hermanmiller.com/content/dam/hermanmiller/documents/product_literature/product_sheets/
- Herman Miller Embody: maker document for the mechanism: www.hermanmiller.com/content/dam/hermanmiller/documents/product_literature/product_sheets/
- Herman Miller Mirra 2: maker document for the mechanism: www.hermanmiller.com/en_gb/products/seating/office-chairs/mirra-2-chair/
- Herman Miller Sayl: maker document for the mechanism: www.hermanmiller.com/content/dam/hermanmiller/documents/product_literature/product_sheets/
- Sedus se:flex: maker document for the mechanism: www.sedus.com/en/products/chairs/seflex
- Steelcase Gesture: maker document for the mechanism: www.steelcase.com/eu-en/products/office-chairs/gesture/
- Steelcase Leap: maker document for the mechanism: uk.steelcase.com/products/leap
- Vitra ID Mesh: maker document for the mechanism: static.vitra.com/media/asset/7794100/storage/master/download/Product%2520Passport%2520ID%2
- Herman Miller Setu: maker document for the mechanism: www.hermanmiller.com/content/dam/hermanmiller/documents/product_literature/product_sheets/
- Interstuhl PUREis3 (PU213): maker document for the mechanism: www.interstuhl.com/prdb/PU213LV01.pdf
All sources checked 22 October 2026. Where a manufacturer does not publish a value, we say so rather than estimate it.
Cite this page
Best Office Chairs Europe, “What is a synchro mechanism? Office chair recline types decoded”, https://bestofficechairs.eu/glossary/synchro-mechanism/, updated .